Steelcraft-automotive 155090 RUNNING BOARD User Manual download pdf (Page 1)

VIEWPOINT RUNNING BOARDS

2007-13 HONDA CRV

Page 1 of 7 9/14/12 (DP)

Front

PARTS LIST:

PROCEDURE:

1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS

CAREFULLY BEFORE STARTING INSTALLATION. CUTTING IS REQUIRED.

2. Identify and separate the driver and passenger side front and rear Mounting Brackets. Start installation

on the driver/left side of the vehicle.

3. Cut out the paper template on Page 6 labeled "Driver Side," (Figure 1). Cut out the square section on

the bottom of the Template and the (2) 8mm holes on the top. Fold the top of the Template up along the

dotted line, (Figure 2). Hold the Template in place over the outer (2) factory 8mm threaded holes next

to the pinch weld, (Figures 3 & 4). IMPORTANT: There are (4) threaded holes at each mounting

location, (2) inner on bottom of frame channel and (2) outer next to pinch weld, (Figure 5). Hold the

correct Template over the outer threaded holes and up against the plastic cover, (Figure 4). Use a

marker to trace the cut out section on the bottom of the Template onto the plastic cover. Repeat this

Step to mark the rear bracket location for cutting.

4. Remove the plastic cover. Cut out the (2) sections as marked. VERY IMPORTANT: The Templates are

driver and passenger side specific and have been provided for reference use only. It is the installer's

responsibility to be absolutely sure that the correct location has been marked before cutting the plastic

cover. To verify the locations before cutting, temporarily assemble the Mounting Brackets as pictured

on Page 1 and check the locations on the cover.

Driver/Left Running Board

10mm Lock Washers

Passenger/Right Running Board

8mm x 25mm Hex Bolts

Front Mounting Bracket Arms

8mm x 22mm OD x 2mm Flat Washers

Rear Mounting Bracket Arms

8mm Lock Washers

Outer Support Brackets

8mm Hex Nuts

Driver/Left Rear Inner Support Bracket

6mm “T” bolts

Passenger/Right Rear Inner Support Bracket

6mm x 22mm OD x 2mm Flat Washers

10mm x 20mm Hex Bolts

6mm Lock Washers

10mm x 20mm OD x 2mm Flat Washers

6mm Hex Nuts

Driver/Left

ear Inner Support

Bracket

(2) Front Bracket Arms

Passenger/Right Rear

Inner Support Bracket

Rear Bracket Arm

Outer Support

Brackets

Outer Support

Brackets

Driver/Left

Running Board

Passenger/Right

Running Board

Front

Driver/Left Side

Passenger/Right

Side

1 2 3 4 5 6 7

Summary of Contents

Page 1 - Passenger/Right

VIEWPOINT RUNNING BOARDS 2007-13 HONDA CRV Page 1 of 7 9/14/12 (DP) Front Front PAR

Page 2

VIEWPOINT RUNNING BOARDS 2007-13 HONDA CRV Page 2 of 7 9/14/12 (DP) 5. Partially install

Page 3

VIEWPOINT RUNNING BOARDS 2007-13 HONDA CRV Page 3 of 7 9/14/12 (DP) Front Front Front Dri

Page 4 - 2007-13 HONDA CRV

VIEWPOINT RUNNING BOARDS 2007-13 HONDA CRV Page 4 of 7 9/14/12 (DP) Front Rear Front Fron

Page 5

VIEWPOINT RUNNING BOARDS 2007-13 HONDA CRV Page 5 of 7 9/14/12 (DP) Rear Driver Side Inst

Page 6

VIEWPOINT RUNNING BOARDS 2007-13 HONDA CRV Page 6 of 7 9/14/12 (DP)

Page 7

VIEWPOINT RUNNING BOARDS 2007-13 HONDA CRV Page 7 of 7 9/14/12 (DP)

Comments to this Manuals

No comments

Steelcraft-automotive 155090 RUNNING BOARD User Manual Page 1

Browse online or download User Manual for For the car Steelcraft-automotive 155090 RUNNING BOARD. Steelcraft Automotive 155090 RUNNING BOARD User Manual

Summary of Contents

Comments to this Manuals

Steelcraft-automotive 155090 RUNNING BOARD User Manual Page 1

Browse online or download User Manual for For the car Steelcraft-automotive 155090 RUNNING BOARD. Steelcraft Automotive 155090 RUNNING BOARD User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for For the car Steelcraft-automotive 155090 RUNNING BOARD